Welcome to Drovidia. In this article, I will share how to flash the Vivo Y15s with model PD2140 without a PC that is experiencing software/system problems, such as bootloop (stuck on logo), failed updates, app errors, and similar issues. I have tried this Vivo Y15s PD2140 flashing tutorial without a PC, and it successfully fixed a Vivo Y15s V2120 that was bootlooping (stuck on logo).
How to flash the Vivo Y15s PD2140 bootloop without a PC via Recovery mode? Read this article to the end, and please don't be lazy about reading so you don't misunderstand and cause a flash failure.
Requirements for flashing the Vivo Y15s PD2140 without a PC via Recovery mode: The Vivo Y15s PD2140 must still be able to enter recovery mode, and I will explain how to enter recovery mode on the PD2140 in the flashing process section.
So, if the Vivo Y15s PD2140 cannot enter recovery mode or can be considered completely dead, then the flashing method is also different. You can check the following article "how to flash Vivo Y15s V2120 via PC" for the tutorial and files.
If you have understood the requirements above, we can continue to the main step, namely how to flash the Vivo Y15s PD2140 bootloop firmware without a PC using Recovery mode and download the required file through the download link below.
How To Flash Vivo Y15s PD2140 V2120 via Recovery Mode
Here is a tutorial guide on how to flash a VIVO Y15s without a PC that you can try:
- Prepare a stable and properly functioning WiFi network to download the firmware through recovery mode, and make sure the Vivo Y15S battery is not low, or you can charge it beforehand.
- Enter Fastboot mode by: with the Vivo Y15s off and the battery installed, then press and hold the Volume Up button + Power button simultaneously until the word Fastboot appears on the Y15s screen.
- Press the Volume Down button and select Recovery mode by pressing the Power button to confirm. The Vivo Y15s will then restart and enter Recovery mode.
- Then select Install software in the Recovery mode menu > then select Network update software, then click OK, and the Vivo Y15s will restart again.
- Click the Download and install button > scan Wi-Fi, then connect to the WiFi network.
- Click the Download and install button, and the Vivo Y15s flashing process will run automatically. Make sure the internet connection is good and stable, also make sure the Vivo Y15s battery does not run low, and wait until the Vivo Y15s flashing process is complete.
If the Vivo Y15s flashing process via Recovery mode finishes without errors, the words Update package installed will appear, which means the Vivo Y15s flashing process via Recovery mode is complete. Next, click the Restart button.
The Vivo Y15s phone will restart automatically and wait until it enters the initial screen, and congratulations. You have successfully flashed the Vivo Y15s without a computer, and the Vivo Y15s can be used normally again
