Is your VIVO Y30 stuck on the VIVO boot logo, caught in an endless restart loop (bootloop), or failing to load the Android system completely after a failed update, incorrect modification, virus infection, or corrupted system files? This is one of the most alarming and common software failures experienced by users of this MediaTek Helio P35-powered device, rendering your phone completely unusable for calls, messages, or any normal function. In many cases, users assume the hardware is damaged and immediately rush to official service centers or local repair shops, paying significant fees for a reflash service, unaware that a reliable, controlled, and do-it-yourself solution exists using the right tool and correct stock firmware.
For VIVO devices running MediaTek chipsets like the Y30, Unlock Tool has established itself as one of the safest, most stable, and feature-rich utilities for flashing official stock firmware, repairing corrupted software, and resolving severe system issues including permanent bootloop, stuck logo, unresponsive recovery mode, and even IMEI or baseband problems. Unlike generic flashing tools that often require complex configuration and carry a high risk of bricking, Unlock Tool simplifies the process with automatic chip detection, pre-loaded firmware compatibility checks, and built-in safeguards designed specifically for VIVO’s secure boot architecture.
This fully tested, up-to-date guide will walk you through the complete, responsible process to flash your VIVO Y30 using Unlock Tool, specifically to resolve a bootloop, fix the stuck VIVO logo, and restore the device to full factory functionality. We will cover every critical requirement: where to download the correct, model-matching stock firmware, how to install the official VIVO MediaTek USB drivers, essential pre-flash precautions including mandatory data backup, clear sequential instructions for both preloader and brom flashing modes, and post-flash setup steps all written in simple language suitable even for beginners, to ensure you can revive your device safely at home without causing permanent software damage.
How to Fix VIVO Y30 Locked Due to Forgotten Pattern
To fix an Android VIVO Y30 phone that is bootlooping and stuck on the VIVO logo when powered on, the method is quite easy using the UnlockTool application. Here are the steps:
- Run the UnlockTool application, then Log In to the Account
- Select the Mediatek Menu
- In the MTK Universal Window Area Right-Click and Select Load Scatter
- Browse to and Load the VIVO Y30 Flash Scatter File
- Uncheck Bootloader and Recovery
- Check Auth ( VIVO V1 [generic])
- Click Flash
- Connect the VIVO Y30 while it is Off while pressing the Volume UP + DOWN buttons simultaneously
- When the UnlockTool Application detects and reads the VIVO Y30 device, release both buttons and wait for the Flash Process to finish by itself
- Done, perform Device setup as usual.
Not sure how to get an UnlockTool account? Don't worry, you can rent UnlockTool at an affordable price on Shopee: Cheap UnlockTool Rental.
Important Note:
- Before performing the Factory Reset process using the UnlockTool application, make sure you have installed the appropriate drivers (Qualcomm / MediaTek / Spreadtrum) on your laptop or computer according to the chipset of the device you are working on. Without installing the drivers, the mobile device will not be detected or recognized by the UnlockTool system.
- The Factory Reset process on the Infinix Smart 9 will erase all internal data on the phone. If you wish to keep your photos, videos, and other files, please select the [EDL] SAFE FORMAT option.
That is an easy way to fix an Android VIVO Y30 phone that bootloops and is stuck on the VIVO logo when powered on using the Unlocktool application. For those of you who do not yet have the Unlocktool application and need it, you can rent the Unlocktool application daily without needing to subscribe.
